How to connect various devices

Switch

Wireless connection: 1. Enter the switch main menu and select "Settings → Controllers & Sensors → Change Controller's Hand/Order".2. Press and hold the controller pairing button for a few seconds.3. The LED 1-LED 4 lamp flashes and the controller is registered.Wired Connection: Connect the controller to the switch dock using the included type-c cable.Note: The "wired connection of the pro controller" is required to be turned on on the switch unit.

macOS

Press and hold the B button and HOME button for 2 seconds to start connecting.LED 3 lights up after successful connection.

Android

Press and hold the X button and HOME button for 2 seconds to start connecting.LED 4 lights up after successful connection.

PC

Use the included type-c cable to connect the controller and the USB port of your PC to use it in a wired connection.This product supports Xinput, and Dinput.+ Button- -button for 3 seconds to switch between application modes.The Xinputt mode will light up LED1 and LED4.Dinput, LED 2 and LED 3 lights up.

How to adjust the LED light

Press and hold the TURBO button + press the left stick button once: single color LED light (lett, orange, yellow, green, cyan, blue, purple, pink, rainbow). Press the TURBO button + press the left stick button 2 times (first): LED breathing mode (lett, orange, yellow, gurin, cyan, blue, purple, pink). Press and hold the left stick button 2 times Click (2nd time). ): LED Colorful Neon Mode TURBO Button Long Press + Left Stick Down Press Button 2 Times (3rd Time): LED Turn Off TURBO Button + Left Stick Down Button: LED Brightness Adjustment (4 levels of 25%-50%-75%-100%).TURBO Button + Right Stick Push Button: You can switch the LED effect of the ABXY button.(3 Patterns of Illumination - Breathing - Off)

How to use the back button

How to install:

Step 1: Hold ML/MR long press Step2: Enter the button you want to install such as A, B, X, Y, L, R, ZL, ZR...etc. Step 3: Release the ML/MR long press state.Complete installationHighlights: Not only a single button, it can also be programmed with multiple buttons (up to 20 inputs).

How to use:

Press XL/XR to use the pre-saved button function.Note: If you assign the button (such as A button) with a consecutive firing function to the back button (for example, ML button), the consecutive shooting state will be copied.The (ML button is also a continuous launch of A button).

Release Method:

Press the XL/XR for a certain time to clear the saved back button.

Adjustable Vibration Strength: Simply press the "Vibration Enhancement" button on the back of the controller and "Vibration Weakening" button.Supports vibration adjustment with switch.Does not support PC or smartphone vibration adjustment.Supports continuous shooting function (long press continuous shooting, continuous firing hold): 1. Press and hold the button on the A, B, X, Y, L, R, ZL, ZR, and cross keys for a few seconds, and you can set the long press and hit the turbo button.2. If you repeatedly do the above mentioned operations, you can set the continuous firing function together.Adjustable Continuous Shooting Speeds: 1. Press the TURBO button and "+" button to increase the speed of the shooting is 1 level.2. Hold the TURBO button and knock the right stick down to the bottom to decrease the speed of continuous firing.